超微粉碎机厂家

咨询热线

13256798563

当前位置:河北快3开奖结果-新闻动态-企业动态-冷冻粉碎机在安全使用的环境下的特点

neixin.png

冷冻粉碎机在安全使用的环境下的特点

冷冻粉碎机可普遍应用于制药、食品、化工、国防科研等行业的物料粉碎,特别对热敏性物质,精密化工、中西药、动植物等及在常温下呈韧性、无法粉碎的物料。深冷粉碎就是先把上述物质采用液氮冷冻到脆化点以下,然后在冷冻粉碎机内被粉碎到所需的细度,而且原成份不会毁坏。并且在常温下易燃易爆的物质,也能低温粉碎,效果更为显著。
Refrigeration crusher can be widely used in pharmaceutical, food, chemical industry, national defense scientific research and other industries of material crushing, especially for heat sensitive materials, precision chemical industry, Chinese and Western medicine, animals and plants, and materials that are tough and can not be crushed at room temperature. Cryogenic comminution means that the above substances are frozen below the brittle point by liquid nitrogen, and then crushed to the required fineness in the cryogenic comminuter, and the original ingredients will not be destroyed. Moreover, flammable and explosive materials at room temperature can also be crushed at low temperature, and the effect is more remarkable.
冷冻粉碎机系统在物料粉碎过程中,其冷源构成一个闭路循环系统,使能源得到充沛应用,俭省能耗:粉碎用的冷源温度可降至负196度,依据物料的脆化点温度,在粉碎过程中其温度可调控,选择佳粉碎温度,降低能耗:粉碎细度可到达10-700目,以至到达微米μ等细度:运用液氮作为研磨介质,完成超低温粉碎,物料的防爆,防氧化等综合效果。
In the process of material crushing, the cold source of the freezing crusher system constitutes a closed-circuit circulating system, which makes full use of energy and saves energy consumption: the temperature of the cold source used for crushing can be reduced to negative 196 degrees. According to the temperature of the material's brittle point, the temperature can be adjusted during the crushing process, and the optimum crushing temperature can be selected to reduce energy consumption: the fineness of crushing can reach 10-700 meshes, and even reach micron mu. Equal fineness: liquid nitrogen is used as grinding medium to complete the comprehensive effects of ultra-low temperature grinding, explosion-proof and oxidation-proof of materials.中药超细粉碎机
冷冻粉碎机平安运用留意事项
Cautions for safe operation of freezing crusher
1、运用前,先检查机器一切紧固件能否拧紧,皮带能否张紧。
1. Before use, check whether all fasteners of the machine can be tightened and whether the belt can be tightened.
2、主轴运转方向必需契合防护罩上所示箭头方向,否则将损坏机器,并可能形成人身伤害。
2. The direction of the spindle must match the arrow direction shown on the shield. Otherwise, it will damage the machine and possibly cause personal injury.
3、检查电器能否完好。
3. Check whether the electrical appliances are in good condition.
4、检查机器粉碎室内有无金属等硬性杂物,否则会打坏刀具,影响机器运转。
4. Check whether there are metal and other hard impurities in the crushing room of the machine. Otherwise, the cutter will be damaged and the operation of the machine will be affected.
5、物料在粉碎前一定要检查纯度,不允许有金属硬杂物混入,以免打坏刀具或惹起熄灭等事故。
5. Material must be checked for purity before crushing. No metal and hard impurities are allowed to mix in, so as not to damage the tool or cause extinction accidents.
6、机器上的油杯应经常注入光滑油,保证机器正常运转。
6. The oil cup on the machine should be injected with smooth oil regularly to ensure the normal operation of the machine.
7、停机前中止加料,如不继续运用,要肃清机内遗留物。
7. Stop feeding before shutdown. If it does not continue to be used, it is necessary to clean up the legacy inside the machine.
8、定期检查刀具同筛网能否损坏,如有损坏,应立刻改换。
8. Check regularly whether the cutter and screen can be damaged or not. If there is any damage, it should be replaced immediately.
9、运用机遇领会有微小振动,一定要将机盖衔接手柄拧紧,防止事故发作。
9. Use the opportunity to grasp the tiny vibration, we must tighten the connecting handle of the cover to prevent accidents.

济南骏程机械设备河北快3开奖结果

PHONE

13256798563 / 400-766-9788 

E-mail

junchengweifen@163.com

ADDRESS

济南市市中区袁庄会龙工业园

Website

http://www.69gege.com

  • 手机客户端
  • 客服微信

河北快3开奖结果 / 关于我们 / 产品中心 / 工程案例 / 新闻动态 / 服务和支持 / 联系我们 /

版权所有:济南骏程机械设备河北快3开奖结果 备案号: 鲁ICP备15034461号-3 技术支持:  网站地图 XML TXT 流量统计:

泊利彩票APP下载 必中彩票注册 伯乐彩票注册 必博彩票平台 博易彩票APP下载 河北快3走势图 伯爵彩票APP下载 必中彩票APP下载 宝马彩票APP下载 河北快3开奖结果