The destroyer of traditional Chinese medicine is composed of feeding hopper, grading wheel, destroying blade, gear disc, destroying motor, outlet, wind blade, aggregate box, dust collecting place, etc. Material from the hopper into the destruction chamber, through the high-speed rotating blades to damage, adjust the separation between the grading wheel and the grading disc to reach the required damage fineness, high-speed rotating blades to reach the required material from the destruction chamber to cyclone separator discharged, did not reach the required materials continue to damage in the destruction chamber.
Before using, it is necessary to carefully check whether the equipment is damaged in transportation, then put the main engine, auxiliary machine and electric box device in place, and connect the pipeline between the main engine and auxiliary machine. The pipeline connection must ensure its sealing. At the same time, the individual machine, pipeline and flange are connected by wires and grounded firmly to avoid dust explosion caused by electrostatic spark.
Before each stand-alone machine is commissioned, check whether there are metal articles in the machine, and if so, row them out. Check whether the bolts are consolidated, whether the belt is tightened properly, and whether the protective cover is firm. The equipment is then tested and investigated to see if it is normal.
Traditional Chinese medicine destroyer should choose a local device which is relatively flat and easy to use.
After running for five minutes, the operator should carefully investigate the appearance of the control cabinet. When the no-load current is stable, it can be widely fed. After normal operation of feeding, no current exceeding 15A should be allowed, otherwise the feeding quantity should be reduced. If the current rises quickly, the gate can be closed and the feeding speed can be slowed down. When the current decreases, the gate can be opened slowly to a suitable opening. The filter bag should be kept free from blockage.
Before operation, the material to be processed should be selected cleanly. It is forbidden to mix hard materials such as metals and stones into the machine, so as to avoid damage to the parts or problems in the machine.
Before starting, check whether the parts are firm and reliable. Everything is normal before you can work.
Turn on the power supply and idle for 1-2 minutes to check whether the operation is normal or not. After everything is normal, the material can be fed. When the machine is working, the operator can't leave. Once the sound is abnormal, the power supply should be disconnected immediately. When processing materials, the outlet should be secured with longer cloth pockets.
Do not use if the power supply voltage is too low in operation, so as not to damage the motor. When the power supply voltage is normal, the machine is not easy to damage and the production efficiency is high.
In the production process, we should often check whether the bearing is warming up. If the temperature of the parts exceeds 50 C, we should increase the water flow to ensure the normal operation of the machine.
Vulnerable parts should be checked and replaced frequently after power failure to ensure production and other parts. Blades and guide rings should be checked for wear frequently. If wear occurs, the output will decrease and the grain size will become coarser. At this time, they should be replaced in time.
This article is organized and published by the low-temperature crusher of traditional Chinese medicine. Do you have any idea about these contents? For more information, please click: http://www.69gege.com. We will have more wonderful content for you to see.